Desktop Publishing – PSEB Solutions

PSEB 10th Class Computer Solutions Chapter 5 Desktop Publishing

October 16, 2024October 15, 2024 by Prasanna

Punjab State Board PSEB 10th Class Computer Book Solutions Chapter 5 Desktop Publishing Textbook Exercise Questions and Answers.

PSEB Solutions for Class 10 Computer Science Chapter 5 Desktop Publishing

Computer Guide for Class 10 PSEB Desktop Publishing Textbook Questions and Answers

1. Multiple Choice Questions

Question 1.
Programs that can be used to create books, magazines, newspapers, flyers, pamphlets, and many other kinds of printed documents.
(a) Desk Publishing
(b) DeskTop Publishing
(c) Top Publishing
(d) Publishing
Answer:
(b) DeskTop Publishing

Question 2.
That enable us to see on the display screen exactly what will appear when the document is printed:
(a) WYSWJKI
(b) WKSWUG
(c) WUSIWUG
(d) WYSIWYG
Answer:
(d) WYSIWYG

Question 3.
A printer that works like a photocopy machine:
(a) Laser
(b) InkJet
(c) Line
(d) Drum
Answer:
(a) Laser

Question 4.
……….. is a visual representation of objects.
(a) Charts
(b) Graphics
(c) Frames
(d) Fonts
Answer:
(b) Graphics

Question 5.
Printer that print image by pressing an inked ribbon against the paper using a hammer or pins.
(a) Ink-jet
(b) Impact
(c) Non impact
(d) Laser
Answer:
(b) Impact

PSEB 10th Class Computer Book Chapter 5 Desktop Publishing

2. Fill in the Blanks

1. Arial, Helvetica, Times, and Verdana etc. are examples of …………… and they have same …………. .
Answer:
Typeface, Design

2. A Gutter margin setting adds extra space to the …………….margin or margin of a ………… document that we plan to bind.
Answer:
Side, Top

3. In web pages the content is ………… not designed for ………… .
Answer:
Viewable, Print

4. Laser printers use …………. that stores an ……………. at a time.
Answer:
Buffers, Entire page.

3. True or False

1. DTP stands for Desk Top Publishing.
Answer:
True

2. Desktop publishing hardware and software is also used to design and produce web pages.
Answer:
True

3. In Ink-Jet Printer, the ink cannot be absorbed into the paper and dries instantly.
Answer:
False.

4. The dot-matrix printer uses print heads containing from 19 to 124 pins.
Answer:
False.

4. Very Short Answer Type Questions

Question 1.
Which printer can typically print the range of 1,200 to 6,000 lines per minute?
Answer:
Line Printer

Question 2.
Which printer can be either two or three-dimensional.
Answer:
Computer Graphics

Question 3.
Which printer has a special coating on it to which toner (an ink powder) sticks?
Answer:
Laser Printers

Question 4.
A set of characters of the same design is called?
Answer:
Typeface

Question 5.
The area between the main content of a page and the page edges is called?
Answer:
Margins

5. Short Answer Type Questions

Question 1.
What is Desktop Publishing?
Answer:
An application of compute that is enables small companies and individuals
to produce reports, visiting cards, calendar, advertising, magazines etc. to near typeset quality. Modern systems, which simulate many of the professional typesetting functions, consist of a personal computer using DTP software.

Question 2.
What are the various types of printers?
Answer:
The various types of printers are:

Impact printer
Non-impact printers
Thermal printers

Question 3.
What is margin?
Answer:
Margins are the distance between the text from left and right edges, top and bottom edges. Margins are normally 1 inch, but you can adjust it according to your need.

Question 4.
What do you mean by Gutter Position?
Answer:
A gutter margin setting adds extra space to the side margin or top margin of a document that we plan to bind. A gutter margin helps ensure that text isn’t hidden by the binding.

Question 5.
What are Graphics?
Answer: A graphic is an image or visual representation of an object. Computer graphics are simply images displayed on a computer screen. Computer graphics can be either two or three-dimensional. There are two main types of 2D graphic:

Bitmap or Raster graphics
Vector graphics

Question 6.
Explain the working of Laser Printer.
Answer:
A laser printer works like a photocopy machine. Laser printers produce images on paper by directing a laser beam at a mirror which again directs the beam onto a drum. The drum has a special coating on it to which toner (an ink powder) sticks. Using patterns of small dots, a laser beam conveys information from the computer to a positively charged drum to become neutralized. From all those areas of drum which become neutralized, the toner detaches. As the paper rolls by the drum, the toner is transferred to the paper printing the letters or other graphics on the paper. A hot roller bonds the toner to the paper.

Question 7.
Explain WYSIWYG feature.
Answer:
WYSIWYG, is an acronym for What You See Is What You Get. The term is used in computing to describe a system in which content displayed during editing appears very similar to the final output, which might be a printed document, web page, slide presentation or even the lighting for a theatrical event.

6. Long Answer Type Questions

Question 1.
What is the difference between Vector Graphics and Bitmap Graphics?
Answer:
The difference between vector and bitmap graphics is as follows:

Vector Graphics	Bitmap Graphics
1. Vector Graphics are passed on Vector Paths	1. They are based on Pixels
2. They do not lose quality	2. They lose quality when expended
3. The file size is less	3. The file size is more.
4. These are used in advanced programmes	4. These are used for basic programmes

Question 2.
What is the difference between Impact and Non-Impact printers?
Answer:
The differences between impact and non impact printers are as follows:

Impact Printer	Non-Impact Printers
1. They produces noise.	1. They do not produce noise.
2. A head is strike on page.	2. No head is striked.
3. They are not costly.	3. They are costly.
4. A ribbon is used.	4. No ribbon is used.
5. They are slower in speed.	5. They are faster in speed.
6. The printing quality is low.	6. Their printing quality is high.
7. They use continous paper sheets.	7. They use individual paper sheets.
8. Example are Dot Matrix, Chain.	8. Example are Laser, Inkjet.

Question 3.
Explain any two types of Impact printers.
Answer:
Following are the two types of impact printers:

1. Impact Printers:
An impact printer has a head that contains pins to make contact with the paper. It usually forms the print image by striking its pins on a inked ribbon against the paper. Following are some examples of impact printers. The dot-matrix printer uses print heads containing from 9 to 24 pins. These pins produce patterns of dots on the paper to form the individual characters.

The 24 pin dot-matrix printer produces more dots that a 9 pin dot-matrix printer, which results in much better quality and clearer characters. The general rule is: the more pins, the clearer the letters on the paper. The pins strike the ribbon individually as the print mechanism moves across the entire print line in both directions, i.e, from left to right, then right to left, and so on. The user can produce a color output with a dot-matrix printer (the user will change the black ribbon with a ribbon that has color stripes). Dot-matrix printers are inexpensive and typically print at speeds of 100¬600 characters per second.

2. Daisy-Wheel Printers:
In order to get the quality of type found on typewriters, a daisy-wheel impact printer can be used. It is called daisy wheel printer because the print mechanism looks like a daisy; at the end of each “Petal” is a fully formed character which produces solid line print. A hammer strikes a “petal” containing a character against the ribbon, and the character prints on the paper. Its speed is slow typically 25-55 characters per second.

PSEB 10th Class Computer Guide Desktop Publishing Important Questions and Answers

Multiple Choice Questions

Question 1.
Which is graphic Software among following?
(a) Adobe Illustrator
(b) Corel Draw
(c) Inter Space
(d) All of Above
Answer:
(d) All of Above

Question 2.
Which one is Photo Editing software?
(a) Adobe Photoshop
(b) Coral PaintShop
(c) Both of These
(d) None of These
Answer:
(c) Both of These

Question 3.
How many types are there of 2D Graphics?
(a) 2
(b) 3
(c) 1
(d) 4
Answer:
(a) 2

Question 4.
What is the type of Laser Printer?
(a) Impact
(b) Non Impact
(c) Both of These
(d) None of these
Answer:
(b) Non Impact

Fill in the Blanks

1. ………….. means spacing between two or more lines.
Answer:
Leading

2. Frame …………..related information or graphics.
Answer:
group

3. WYSIWYG means …………… .
Answer:
what you see is what I get.

4. We can …………. document in many ways.
Answer:
print.

5. Faster color laser printer can print …………. pages/min.
Answer:
100.

True/False

1. Header is written on the bottom of the page.
Answer:
False

2. MS-Word is a DTP software.
Answer:
True

3. We don’t need to planning for preparing a document.
Answer:
False

4. Style include bullet effects.
Answer:
True

5. Spacing between two or more lines are called scaling.
Answer:
False

Very Short Answer Type Questions

Question 1.
What is the full form of WYSIWYG?
Answer:
What You See Is What You Get

Question 2.
Which is the best printing?
Answer:
Laser Printing

Question 3.
The printing in which ink is settled on paper is called?
Answer:
Offset Printing

Short Answer Type Questions

Question 1.
What do you mean by Desktop Publishing?
Answer:
An application of computer that is enables small companies and individuals to produce reports, visiting cards, calendar, advertising, magazines etc. to near typeset quality. Modern systems, which simulate many of the professional typesetting functions, consist of a personal computer using DTP software.

Question 2.
What are the various methods of printing?
Answer:
There are two methods of printing:

1. Offset Printing:
Ink sit on the surface of the paper, nearly all modem printing is offset. Most short-run-jobs are now being done digitally. Instead of the offset printing as personal, for business use it becomes better and Cheaper.

2. Laser Printing:
A laser printer is a common type of printer that produces high quality text and graphics. Laser printer uses non-impact photo copier technology.

Question 3.
What do you mean by Scaling, Tracking & Leading?
Answer:
1. Scaling:
There are a number of ways for adjusting text in a document. This term refers to that, without changing the points of any font we can increase or decrease its width.

2. Tracking:
Tracking simple means to increase or decrease the character space in a word or multiple words. It can also measure in points.

3. Leading:
It simply shows the line space between two or more lines. It can also measure in points or depends upon the desktop publishing software.

Question 4.
What are Margins?
Answer:
Margins are the distance between the text from left and right edges, top and bottom edges. Margins are normally 1 inch, but you can adjust it according to your need.

Question 5.
What do you mean Document Planning?
Answer:
Document planning mean to set the following:

Page layout
Style
Margin
Hader and Fotter
Font

Long Answer Type Questions

Question 1.
What are fonts?
Answer:
A font is a set of printable or displayable text character s in a specific style and size or we can say that a font is a specific typeface of a certain size and style. A typeface is a set of characters of the same design. These characters include letters, numbers, punctuation marks, and symbols. Some popular typefaces include Arial, Helvetica, Times, and Verdana. While most computers come with a few dozen typefaces installed, there are thousands of typefaces available.
PSEB 10th Class Computer Solutions Chapter 5 Desktop Publishing
Question 2.
What do you mean by WYSIWYG?
Answer:
A WYSIWYG is a system in which content (text and graphics) can be edited in a form closely resembling its appearance when printed or displayed as a finished product, such as a printed document, web page, or slide presentation. WYSIWYG is especially popular for desktop publishing.

With desktop publishing, we can increase productivity, minimize production cost, enhance the appearance of our documents, improve the level of creativity, reduce the time taken for printing and produce customized documents. The best part about DTP is that we can create professional-looking documents, without the need for graphic designer.

Question 3.
What are different types of printers? Discuss working of Laser printer.
Answer:
Printer:
A printer is an external output device that takes data from a computer and generates output on a paper in the form of graphics/text. There are two types of printers.

Impact Printers:
An impact printer has a head that contains pins to make, contact with the paper. It usually forms the print image by striking its pins on a inked ribbon against the paper. Following are some examples of impact printers:

1. Dot-Matrix Printers:
The dot-matrix printer uses print heads containing from 9 to 24 pins. These pins produce patterns of dots on the paper to form the individual characters. The 24 pin dot-matrix printer produces more dots that a 9 pin dot-matrix printer, which results in much better quality and clearer characters.The general rule is, the more pins, the clearer the letters on the paper.

The pins strike the ribbon individually as the print mechanism moves across the entire print line in both directions, i.e, from left to right, then right to left, and so on. The user can produce a color output with a dot-matrix printer (the user will change the black ribbon with a ribbon that has color stripes). Dot-matrix printers are inexpensive and typically print at speeds of 100-600 characters per second.

2. Daisy-Wheel Printers:
It is called daisy-wheel printer because the print mechanism looks like a daisy; at the end of each “Petal” is a fully formed character which produces solid-line print. A hammer strikes a “petal” containing a character against the ribbon, and the character prints on the paper. Its speed is slow typically 25-55 characters per second.

3. Line Printers:
Line printers, or line-at-a-time printers, use special mechanism. that can print a whole line at once; it can typically print the range of 1,200 to 6,000 lines per minute. Drum, chain, and band printers are line-at- a-time printers.

Non-Impact Printers:
Non-impact printers do not use a striking device to produce characters on the paper; and because these printers do not hammer against the paper its much quieter. Following are some non-impacted printers:

1. Ink-Jet Printers:
Ink-jet printers work in the same fashion as dot matrix printers in the form images or characters with little dots. However, the dots are formed by tiny droplets of ink. Ink-jet printers form characters on paper by spraying ink from tiny nozzles through an electrical field that arranges the charged ink particles into characters at the rate of approximately 250 characters per second. The ink is absorbed into the paper and dries instantly. Various colors of ink can also be used.

2. Laser Printers:
A laser printer works like a photocopy machine. Laser printers produce images on paper by directing a laser beam at a mirror which again directs the beam onto a drum. The drum has a special coating on it to which toner (an ink powder) sticks. Using patterns of small dots, a laser beam conveys information from the computer to a positively charged drum to become neutralized. From all those areas of drum which become neutralized, the toner detaches. As the paper rolls by the drum, the toner is transferred to the paper printing the letters or other graphics on the paper. A hot roller bonds the toner to the paper.

Laser printers use buffers entire page at a time. When a whole page is loaded, it will be printed. The speed of laser printers is high and it print quietly without producing much noise. Many home-use laser printers can print eight pages per minute, but faster and print approximately 21,000 lines per minute, or 437 pages per minute (if each page contains 48 lines). When high speed laser printers were introduced they were expensive.

PSEB 10th Class Computer Notes Chapter 5 Desktop Publishing

October 8, 2024October 7, 2024 by Bhagya

This PSEB 10th Class Computer Notes Chapter 5 Desktop Publishing will help you in revision during exams.

PSEB 10th Class Computer Notes Chapter 5 Desktop Publishing

Desktop publishing is a term coined after the development of a specific type of software. It’s about using that software to combine and rearrange text and images and creating digital files. Desktop publishing (also known as DTP) combines, a personal computer and WYSIWYG(What You See Is What You Get) page layout software to create publication documents on a computer for either large scale publishing or small scale local multifunction peripheral output and distribution.

Desktop Publishing:

The term “desktop publishing” is commonly used to describe page layout skills. However, the skills and software are not limited to paper and book publishing. The same skills and software are often used to create graphics for point of sale displays, promotional items, trade show exhibits, retail package designs and outdoor signs. Desktop publishing refers to the act of using software on a personal computer to combine mixed-media elements such as text, photos, or charts into printable documents.

Once created, these documents can either be printed on a home printer or outsourced to a professional printing service. One of the key features is the ability to preview a page layout before prior to printing, via a feature called What You See Is What You Get (WYSIWYG), pronounced wizzy-wig. While this Was once taught through advanced education programs, advancements in software means that the process is less difficult to master than in past decades.

Definition of DTP

Desktop publishing is the process of using a computer and specific types of software to combine text, images and artwork to produce documents properly formatted for print or visual consumption.

DTP opened visual communication to all with the advent ofdesktop publishing software and affordable desktop computers, a wide range of people, including non-designers and others without graphic design experience, suddenly had the tools to become desktop publishers.

Freelance and in-house graphic designers, small business owners, secretaries, teachers, students and individual consumers do desktop publishing. Non-designers can create visual communications for commercial digital printing, printing on a printing press, and for desktop printing at home or in the office.

Visual Communication using DTP

Now, anyone can do desktop publishing. We dont need any professional for that. Designing and printing both are included in desktop publishing but usually it is considered a process of creating a digital file of product only.

Desktop-Publishing Software:

The primary software used in desktop publishing is page layout software and web design software. Graphics software, including drawing software, a photo editor and word processing software, are also important tools of the graphic designer or desktop publisher. The list of available software is lengthy, but some software is seen on just about everyone’s must-have list depending on what they are trying to accomplish.

Page Layout Software for Printing:

Adobe InDesign
PagePlus Series from Serif
QuarkXpress

Page Layout Software for Office:

1. Microsoft Office Suite Apple iWork Suite

Graphics Software:

Adobe Illustrator
Corel Draw
Inkscape

Photo Editing Software:

Adobe Photoshop
Corel PaintShop Pro

Web Design Software:

Adobe Dreamweaver CC
Adobe Muse

Word Processing and Desktop Publishing:

The similarities between the two are:

Both deal with text that can be formatted.
Both can work with tables and pictures.
Both have many similar features like WordArt, Clip Art, and text styles.

The Differences between DTP and Word Processing:

Word processing involves creation, editing, and printing of text while desktop publishing involves production of documents that combine text with graphics. Word processing is difficult to layout and design as compared to desktop publishing. Thus, desktop publishing is used to work on things like newsletters, magazines, adverts, and brochures where layout is important. Word processing documents are common for simple memos, letters, manuscripts, and resumes.

The difference between desktop publishing and word processing software is as follows:

Desktop Publishing

Word Processing

1. DTP involves production of documents that combine text and graphics.

2. Layout designing is easy.

3. Main products are newsletter, magazines adverts etc.

4. They involve more graphics.

5. Its products are coloured mainly.

Word processors deals with creation, edition of text.

Layout designing is difficult.

Main products are documents and resumes.

They involve more text.

They are used to get black and white documents.

Wysiwyg Feature:

A WYSIWYG is a system in which content (text and graphics) can be edited in a form closely resembling its appearance when printed or displayed as a finished product, such as a printed document, web page, or slide presentation. WYSIWYG is especially popular for desktop publishing.

Graphics:

A graphic is an image or visual representation of an object. Therefore, computer graphics are simply images displayed on a computer screen. Graphics Eire often contrasted with text, which is comprised of characters, such as numbers and letters, rather than images.

Computer graphics can be either two or three-dimensional. Early computers only supported 2D monochrome graphics, meaning they were black and white. Eventually, computers began to support color images. While the first machines only supported 16 or 256 colors, most computers can now display graphics in millions of colors.

Bitmap or Raster Graphics

Bitmap graphics consist of many tiny dots called pixels. It is possible to edit each individual pixel using bitmap graphics software like Adobe Photoshop. Examples of bitmap graphics are a digital photograph or a scanned image. The amount of detail we can draw depends on the number of pixels per square inch (PSI). Since the computer has to store information about every single pixel in the image, the file size of a bitmap graphic is often quite large. When we resize a bitmap graphic, it tends to lose its quality.

Vector Graphics

Vector graphics are based on control points which are connected by lines and curves called vector paths or vectors. Vector paths can be used to make shape objects. It is possible to edit each shape object separately, for example, to change the shape, outline type (stroke), fill, size or position.
PSEB 10th Class Computer Notes Chapter 5 Desktop Publishing Notes 1
The difference between vector and bitmap graphics is as follows :

Vector Graphics

Bitmap Graphics

1. Vector Graphics are passed on Vector Paths

2. They do not lose quality

3. The file size is less

4. These are used in advanced programmes

They are based on Pixels

They lose quality when expended

The file size is more.

These are used for basic programmes

Margins:

A margin is the area between the main content of a page and the page edges. The margin helps to define where a line of text begins and ends. A page to include top, Bottom, Left and Right margin.

The default margins are usually defined as one inch on all sides. However, depending on the requirement, the margins may vary. These margins create a frame around the content of the page so that the text does not run all the way to the edges. The white space along the edges of the document makes the page look cleaner and the text is easier to read.
PSEB 10th Class Computer Notes Chapter 5 Desktop Publishing Notes 2

Gutter Position

A gutter margin setting adds extra space to the side margin or top margin of a document that we plan to bind. A gutter margin helps ensure that text isn’t hidden by the binding.

Fonts:

A font is a set of printable or displayable text character s in a specific style and size or we can say that a font is a specific typeface of a certain size and style. A typeface is a set of characters of the same design. These characters include letters, numbers, punctuation marks, and symbols. Some popular typefaces include Arial, Helvetica, Times, and Verdana. While most computers come with a few dozen typefaces installed, there are thousands of typefaces available.
PSEB 10th Class Computer Notes Chapter 5 Desktop Publishing Notes 3

Printer:

A printer is an external output device that takes data from a computer and generates output on a paper in the form of graphics/text. There are two types of printers.

Impact Printers

An impact printer has a head that contains pins to make, contact with the paper. It usually forms the print image by striking its pins on a inked ribbon against the paper. Following are some examples of impact printers:

1. Dot-Matrix Printers. The dot-matrix printer uses print heads containing from 9 to 24 pins.
These pins produce patterns of dots on the paper to form the individual characters. The 24 pin dot-matrix printer produces more dots that a 9 pin dot-matrix printer, which results in much better quality and clearer characters.
PSEB 10th Class Computer Notes Chapter 5 Desktop Publishing Notes 4
The general rule is, the more pins, the clearer the letters on the paper. The pins strike the ribbon individually as the print mechanism moves across the entire print line in both directions, i.e, from left to right, then right to left, and so on. The user can produce a color output with a dot-matrix printer (the user will change the black ribbon with a ribbon that has color stripes). Dot-matrix printers are inexpensive and typically print at speeds of 100-600 characters per second.

2. Daisy-Wheel Printers. It is called daisy-wheel printer because the print mechanism looks like a daisy; at the end of each “Petal” is a fully formed character which produces solid-line print. A hammer strikes a “petal” con-taining a character against the ribbon, and the character prints on the paper. Its speed is slow typically 25-55 characters per second.
PSEB 10th Class Computer Notes Chapter 5 Desktop Publishing Notes 5

3. Line Printers. Line printers, or line-at-a-time printers, use special mecha¬nism. that can print a whole line at once; it can typically print the range of 1,200 to 6,000 lines per minute. Drum, chain, and band printers are line-at- a-time printers.

Non-Impact Printers:

Non-impact printers do not use a striking device to produce characters on the paper; and because these printers do not hammer against the paper its much quieter. Following are some non-impacted printers:

1. Ink-Jet Printers

Ink-jet printers work in the same fashion as dot-matrix printers in the form images or characters with little dots. However, the dots are formed by tiny droplets of ink.
PSEB 10th Class Computer Notes Chapter 5 Desktop Publishing Notes 6
Ink-jet printers form characters on paper by spraying ink from tiny nozzles through an electrical field that arranges the charged ink particles into characters at the rate of approximately 250 characters per second. The ink is absorbed into the paper and dries instantly. Various colors of ink can also be used.

2. Laser Printers

A laser printer works like a photocopy machine. Laser print¬ers produce images on paper by directing a laser beam at a mirror which again directs the beam onto a drum. The drum has a special coating on it to which toner (an ink powder) sticks. Using patterns of small dots, a laser beam conveys information from the computer to a positively charged drum to become neutralized. From all those areas of drum which become neutralized, the toner detaches. As the paper rolls by the drum, the toner is transferred to the paper printing the letters or other graphics on the paper. A hot roller bonds the toner to the paper.
PSEB 10th Class Computer Notes Chapter 5 Desktop Publishing Notes 7
Laser printers use buffers entire page at a time. When a whole page is loaded, it will be printed. The speed of laser printers is high and it print quietly without producing much noise. Many home-use laser printers can print eight pages per minute, but faster and print approximately 21,000 lines per minute, or 437 pages per minute (if each page contains 48 lines). When high speed laser printers were introduced they were expensive.